English Boards > Support

Epson TM-T88IV Very slow printing. Any help would be appreciated.

(1/2) > >>

DQ:
Hello,
  I am using Epson TN-T88IV Serial port printer with Epson Advanced Printer driver for Windows.  Printing is very slow but when I test on printer directly (using feed button while starting), it prints very fast. 

My Settings are
Baud rate:38400
Parity: None
bit: 1
XX: DTR/DTS*

any help would be appreciated.

JohnS:
Is it slow if you print a Windows test page or other document ?

Is there a draft setting for the printer that you can use in the printer templates?

lemmings:
Check you have the correct printer type set in SambaPos.

My Epson was doing that when I changed from my test database to production and I set the printer but did not change it to a Ticket Printer.

DQ:
How do I set the 'printer type set'? Below are my printer settings and have done same on EPOSN printer driver and COM1 port under Devices.

https://www.dropbox.com/s/6bw1nrqv23t0mld/new%20doc20130404064906127.pdf

DQ:
John,
 Yes, it does print slow with Windows test page but it is very fast if printed using Feed button on the printer so printer settings are fine.
I did not see any draft settings.

Navigation

[0] Message Index

[#] Next page