English Boards > Support

Sad Day

<< < (2/2)

emre:
OK. I've converted that error to a notification. You should be able to access management now.
Download 2.91a

http://code.google.com/p/sambapos/downloads/list

topsplodge:
Great back in it was an error on the printer type for the pole display put it back to port printer no error but pole still not working but thanks for the help to get back in this is the best support I have ever seen in all my years. You can quote me on that :)

JohnS:
Check that the Pole Display is on the correct COM port. When you move a USB device to a new port, Windows will give you a new COM port number for it.

topsplodge:
I am trying to use a posiflex 302 which is a serial device and is plugged into COM1 but no joy yet have all the templates and stuff configured from the excellent forum posts but not quite got it to work yet. The port is configured right speed etc any pointers would be appreciated but thx for the help so far.

JohnS:
You should be able to send text to it from a DOS prompt

echo Hello >COM1

If that does work, then its a windows problem, not SambaPOS. My pole displays don't require a driver, in fact they where harder to use with a driver installed.
Note - Make sure that the command group in the pole display is set to Automatic if possible.

Navigation

[0] Message Index

[*] Previous page