SambaPOS Forum

English Boards => Support => Topic started by: pramil on February 23, 2013, 12:34:38 pm

Title: Epson TM-U220
Post by: pramil on February 23, 2013, 12:34:38 pm: I have an EPSON TM-U220 connected to a cash drawer. I have tried to open the drawer using <DRAWER> and <XCT 27,112,48,55,121> <XCT 27,112,0,25,250> and <XCT 27,112,0,64,240> but all these failed. can someone help and give me the code?
Title: Re: Epson TM-U220
Post by: emre on February 23, 2013, 03:48:08 pm: According to this page http://keyhut.com/popopen.htm (http://keyhut.com/popopen.htm) it should be 27,112,0,25,250 OR 27,112,0,64,240.
Title: Re: Epson TM-U220
Post by: pramil on February 24, 2013, 12:17:40 pm: Thanx. But tried both these codes. Did not work. Gave <XCT 27,112,0,64,240> or <XCT 27,112,0,25,250> in the header section of the template. The printout comes, not the drawer. Drawer ejects when printing done using windows (test page). What can I do? Any setting in the SAMBAPOS to change?
Title: Re: Epson TM-U220
Post by: lemmings on February 24, 2013, 04:02:56 pm: I have always put ESC code for drawer opening in the footer template, does in work in the header template
Title: Re: Epson TM-U220
Post by: emre on February 24, 2013, 09:16:30 pm: Yes the problem might be what lemmings said.

If it don't work the printer might be configured to open drawer on every print (instead of command). I didn't used that printer before. Can you check if there is such setting on printer configuration tool?

We can also try to fake a Form Feed command with <XCT 12> or <XCT 21,74>
Title: Re: Epson TM-U220
Post by: pramil on February 24, 2013, 10:00:12 pm: Removed the settings in of the printer. (See attachment). Is the syntax <XCT 27,112,48,55,121> correct? I gave a blank template with only this in the header. Tried the footer also, did not work. The printer prints the blank, but does not open drawer.
Title: Re: Epson TM-U220
Post by: pramil on February 24, 2013, 10:01:14 pm: How to use the fake command? What does it do? Sorry, I'm new to SambaPOS.
Title: Re: Epson TM-U220
Post by: pramil on February 25, 2013, 01:27:32 am: Got it solved. Thanx for all the help. Since I have USB printer, had to install virtual com port. Basic error!