SambaPOS Forum

English Boards => Support => Topic started by: moaaz on February 07, 2012, 01:04:24 pm

Title: how can i connect phone line to the program (caller-id)
Post by: moaaz on February 07, 2012, 01:04:24 pm

I would like to use the Caller-id identification in the program, so i connected the phone line to modem (windows 7) but the message didn't fade away, and i couldn't receive caller-id in the program, the pop up message was " install the hardware driver to enable the caller-id"
my question is: what driver, and how?

Title: Re: how can i connect phone line to the program (caller-id)
Post by: emre on February 07, 2012, 06:40:40 pm

Our caller id library supports a widely used USB CallerID Box Called CID-Show in our country and the driver SambaPOS asking is the driver of this hardware. I think this hardware based on no-name China Made boards so I don't know if this driver is compatible with other hardware or not.

Title: Re: how can i connect phone line to the program (caller-id)
Post by: moaaz on February 12, 2012, 09:32:03 am

We dont have this in out country, I'll try to replace it with YAC server, what do you think about that?

Title: Re: how can i connect phone line to the program (caller-id)
Post by: emre on February 12, 2012, 12:17:39 pm

I've never used YAC before. Does it work with Caller-ID modems? If it works with modems alternatively you can listen modem calls with TAPI library.

You can duplicate CidMonitor module with a different name and modify it for YAC.

Title: Re: how can i connect phone line to the program (caller-id)
Post by: yousufjam on October 29, 2012, 01:03:25 pm

Hi Emre,
I found a usb caller id device on the internet I was Just wondering if itwould be compatible with sambapos
http://www.dual-comm.com/USB_Caller_ID_Modem.htm (http://www.dual-comm.com/USB_Caller_ID_Modem.htm)