« previous next »
Pages: [1]

Author Topic: Sad Day  (Read 15440 times)

topsplodge

  • Newbie
  • *
  • Posts: 22
Sad Day
« on: March 21, 2012, 08:11:58 pm »
Hi all, I have spent time setting up and have thought that this is a fantastic active project. So have invested a lot of time to setup the menus and recipes etc and had planned to take all the kit to the cafe today. I started at 10pm with plans for some final price tweeks but the system is throwing exceptions when I login cant find any info to know where to look. I downloaded the latest version which ran after install but after exiting it will not run so any ideas as to what to do please advise. I dont know what caused it and have no idea how to fix

Any help Please
 
Logged

emre

  • SambaPOS Developer
  • Samba Team
  • Hero Member
  • *****
  • Posts: 1564
Re: Sad Day
« Reply #1 on: March 21, 2012, 08:20:05 pm »
Update it
http://code.google.com/p/sambapos/downloads/list

if it is 2.91 send the error report.
« Last Edit: March 21, 2012, 08:21:43 pm by emre »
Logged

topsplodge

  • Newbie
  • *
  • Posts: 22
Re: Sad Day
« Reply #2 on: March 21, 2012, 08:26:46 pm »
Done and report sent what have i done wrong???
Logged

emre

  • SambaPOS Developer
  • Samba Team
  • Hero Member
  • *****
  • Posts: 1564
Re: Sad Day
« Reply #3 on: March 21, 2012, 08:28:03 pm »
Error report says "The printer name is invalid". That's the printer that executes by a rule. Can you access management?
Logged

topsplodge

  • Newbie
  • *
  • Posts: 22
Re: Sad Day
« Reply #4 on: March 21, 2012, 08:35:33 pm »
No as soon as pin entered error comes up then sambapos closes
Logged

emre

  • SambaPOS Developer
  • Samba Team
  • Hero Member
  • *****
  • Posts: 1564
Re: Sad Day
« Reply #5 on: March 21, 2012, 08:42:01 pm »
OK. I've converted that error to a notification. You should be able to access management now.
Download 2.91a

http://code.google.com/p/sambapos/downloads/list
Logged

topsplodge

  • Newbie
  • *
  • Posts: 22
Re: Sad Day But Smiles all round now
« Reply #6 on: March 21, 2012, 08:53:18 pm »
Great back in it was an error on the printer type for the pole display put it back to port printer no error but pole still not working but thanks for the help to get back in this is the best support I have ever seen in all my years. You can quote me on that :)
Logged

JohnS

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 677
Re: Sad Day
« Reply #7 on: March 21, 2012, 11:18:19 pm »
Check that the Pole Display is on the correct COM port. When you move a USB device to a new port, Windows will give you a new COM port number for it.
Logged
SambaPOS - POS'n the World, one Terminal at a time.

topsplodge

  • Newbie
  • *
  • Posts: 22
Re: Sad Day
« Reply #8 on: March 22, 2012, 02:05:04 pm »
I am trying to use a posiflex 302 which is a serial device and is plugged into COM1 but no joy yet have all the templates and stuff configured from the excellent forum posts but not quite got it to work yet. The port is configured right speed etc any pointers would be appreciated but thx for the help so far.
Logged

JohnS

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 677
Re: Sad Day
« Reply #9 on: March 22, 2012, 03:59:48 pm »
You should be able to send text to it from a DOS prompt

echo Hello >COM1

If that does work, then its a windows problem, not SambaPOS. My pole displays don't require a driver, in fact they where harder to use with a driver installed.
Note - Make sure that the command group in the pole display is set to Automatic if possible.
Logged
SambaPOS - POS'n the World, one Terminal at a time.
Pages: [1]
« previous next »